Kunsan Air Base

Sort By

Category

Show Advanced Options

Clear Filters |

Defend the Base: SFS catches simulated suspects in Wolves Den

A simulated suspect stands at a fence during a training event at Kunsan Air Base, Republic of Korea, Sept. 11, 2022. The 8th Security Forces Squadron patrolmen were tested on their ability to use the least amount of force necessary to mitigate visitors from recording sensitive assets. (U.S. Air Force photo by Staff Sgt. Sadie Colbert)

Details Download

Defend the Base: SFS catches simulated suspects in Wolves Den

U.S. Air Force Senior Airman FC Beltran, 8th Security Forces Squadron patrolman, performs a sweep during a training event at Kunsan Air Base, Republic of Korea, Sept. 11, 2022. During the training event, personnel performed ground and vehicle sweeps to ensure they thoroughly secured the area of any potential threats from coming onto the installation. (U.S. Air Force photo by Staff Sgt. Sadie Colbert)

Details Download

Defend the Base: SFS catches simulated suspects in Wolves Den

An 8th Security Forces Squadron patrolman escorts a simulated suspect during a training event at Kunsan Air Base, Republic of Korea, Sept. 11, 2022. After being apprehended, the suspects were taken back for identification and transportation. (U.S. Air Force photo by Staff Sgt. Sadie Colbert)

Details Download

CE augmentees arrive to lend a helping hand

Airman 1st Class Marcus Perez, 35th Civil Engineer Squadron heating, ventilation, and air conditioning (HVAC) technician, from Misawa Air Base, Japan, looks through a refractometer at Kunsan Air Base, Republic of Korea, Sept. 12, 2022. A refractometer is used as a field device for the measurement of dissolvable substances in water. (U.S. Air Force photo by Senior Airman Shannon Braaten)

Details Download

CE augmentees arrive to lend a helping hand

Tech. Sgt. Ryan Peterson, 319th Civil Engineer Squadron heating, ventilation, and air conditioning (HVAC) technician, Grand Forks Air Force Base, North Dakota, examines an electrical panel at Kunsan Air Base, Republic of Korea, Sept. 12, 2022. The 319th CES sent CE professionals to assist the 8th Civil Engineer Squadron in executing infrastructure repairs and preventative maintenance. (U.S. Air Force photo by Senior Airman Shannon Braaten)

Details Download

CE augmentees arrive to lend a helping hand

Maj. Matthew Fecke, 8th Civil Engineer Squadron operations flight commander, speaks with 8th CES augmentees at Kunsan Air Base, Republic of Korea, Sept. 12, 2022. Augmentees supplement a specialized skill set when manning shortages occur. The 8th Civil Engineer Squadron recently received augmentees from around the Air Force to expedite infrastructure repairs and preventative maintenance. (U.S. Air Force photo by Senior Airman Shannon Braaten)

Details Download

CE augmentees arrive to lend a helping hand

Staff Sgt. Robert Smith, 11th Civil Engineer Squadron heating, ventilation, and air conditioning (HVAC) technician, from Joint Base Anacostia-Bolling, Washington D.C., loosens a bolt during routine maintenance of an HVAC system at Kunsan Air Base, Republic of Korea, Sept. 12, 2022. Air Force civil engineers maintain facilities which improve the welfare and raise the living standards of Airmen. (U.S. Air Force photo by Senior Airman Shannon Braaten)

Details Download

CE augmentees arrive to lend a helping hand

Staff Sgt. Robert Smith, 11th Civil Engineer Squadron heating, ventilation, and air conditioning (HVAC) technician, from Joint Base Anacostia-Bolling, Washington D.C., loosens a bolt during routine maintenance of HVAC systems at Kunsan Air Base, Republic of Korea, Sept. 12, 2022. HVAC technicians are at the forefront of dirty jobs, often finding themselves covered in sludge, slime and liquids as a part of the maintenance process. (U.S. Air Force photo by Senior Airman Shannon Braaten)

Details Download

CE augmentees arrive to lend a helping hand

An 8th Civil Engineer Squadron heating, ventilation, and air conditioning (HVAC) augmentee meets with Senior Master Sgt. John Graham, 8th CES infrastructures superintendent, before commencing augmentee duties at Kunsan Air Base, Republic of Korea, Sept. 12, 2022. The 8th CES recently received augmentees from around the Air Force to expedite infrastructure repairs and preventative maintenance. (U.S. Air Force photo by Senior Airman Shannon Braaten)

Details Download

CE augmentees arrive to lend a helping hand

Master Sgt. Charles Bass, 8th Civil Engineer Squadron first sergeant, speaks with augmentees before they start work at Kunsan Air Base, Republic of Korea, Sept. 12, 2022. 12 civil engineer professionals from around the Air Force were sent to the 8th Fighter Wing to assist in to assist in fulfilling workorders and infrastructure sustainment repairs around the installation. (U.S. Air Force photo by Senior Airman Shannon Braaten)

Details Download

CE augmentees arrive to lend a helping hand

Senior Airman Omar Gatan, 319th Civil Engineer Squadron heating, ventilation, and air conditioning (HVAC) technician, Grand Forks Air Force Base, North Dakota, turns a crescent wrench at Kunsan Air Base, Republic of Korea, Sept. 12, 2022. Civil engineers often work in cramped, uncomfortable and dirty spaces to successfully repair and maintain equipment. (U.S. Air Force photo by Senior Airman Shannon Braaten)

Details Download

Wolf Pack “metal heads” forge mission

Staff Sgt. Dante Custis, 8th Maintenance Squadron aircraft metals technology craftsman, inspects a newly cut metal part at Kunsan Air Base, Republic of Korea, Aug. 26, 2022. Whereas most careers involved in fabrication are split between machinists, welders and programmers, the metals technology Airmen can run all three positions, giving them flexibility to quickly accomplish their tasks. (U.S. Air Force photo by Staff Sgt. Sadie Colbert)

Details Download

Wolf Pack “metal heads” forge mission

Staff Sgt. Dante Custis, 8th Maintenance Squadron aircraft metals technology craftsman, inspects a fabrication probe at Kunsan Air Base, Republic of Korea, Aug. 26, 2022. The probe measures the size of the metal slab and sends the measurement into the machine to ensure an accurate scaled cut. (U.S. Air Force photo by Staff Sgt. Sadie Colbert)

Details Download

Wolf Pack “metal heads” forge mission

Staff Sgt. Dante Custis, 8th Maintenance Squadron aircraft metals technology craftsman, seats a slab of metal at Kunsan Air Base, Republic of Korea, Aug. 26, 2022. The flight customizes their fabrication machines with different tools to ensure precise cuts and the desired quality of each piece. (U.S. Air Force photo by Staff Sgt. Sadie Colbert)

Details Download

Wolf Pack “metal heads” forge mission

Airmen with the 8th Maintenance Squadron aircraft metals technology flight watch fabrication machines work at Kunsan Air Base, Republic of Korea, Aug. 26, 2022. The flight is certified to operate computer-aided machinery, welding and digital design programs to provide services to various customers around the base. (U.S. Air Force photo by Staff Sgt. Sadie Colbert)

Details Download

Wolf Pack “metal heads” forge mission

Staff Sgt. Dante Custis, 8th Maintenance Squadron aircraft metals technology craftsman, works a control panel at Kunsan Air Base, Republic of Korea, Aug. 26, 2022. The flight can use computer-aided design programs to create 3-D models that are transport them into various fabrication machines and create needed parts for their customers. (U.S. Air Force photo by Staff Sgt. Sadie Colbert)

Details Download

Wolf Pack “metal heads” forge mission

Airman Samuel Arnold, 8th Maintenance Squadron aircraft metals technology apprentice, sets the cut height for a machine at Kunsan Air Base, Republic of Korea, Aug. 26, 2022. Metals technology Airmen attend a 90-day technical school where they learn the basics of hand-tool usage, welding and machining. (U.S. Air Force photo by Staff Sgt. Sadie Colbert)

Details Download

Wolf Pack “metal heads” forge mission

Staff Sgt. Dante Custis, 8th Maintenance Squadron aircraft metals technology craftsman, displays a 3-D model at Kunsan Air Base, Republic of Korea, Aug. 26, 2022. The flight utilizes their skills to craft parts for aircraft or various shops who can no longer order or ship items necessary to accomplish their missions. (U.S. Air Force photo by Staff Sgt. Sadie Colbert)

Details Download

POL: Pumping up the jets

Airman 1st Class Maggie Bennett, 8th Logistics Readiness Squadron fuels distribution operator, retrieves a JP-8 fuel hose line at Kunsan Air Base, Republic of Korea, Aug. 26, 2022. The JP-8 fuel includes icing inhibitor additives which prevent the fuel from freezing during high altitude flights and when extreme cold weather is present. (U.S. Air Force photo by Staff Sgt. Sadie Colbert)

Details Download

POL: Pumping up the jets

Airman 1st Class Maggie Bennett, 8th Logistics Readiness Squadron fuels distribution operator, squeezes a fuel control handle at Kunsan Air Base, Republic of Korea, Aug. 26, 2022. The fuel hose line allows fuel operators to fuel an aircraft at their parked locations or right before takeoff to help quickly launch jets. (U.S. Air Force photo by Staff Sgt. Sadie Colbert)

Details Download